- BrandCoats
- Country of manufactureUnited Kingdom
- Type of threadStaple
Coats Aquamelt threads the shtapelny polyvinylspirit (PVS) threads intended for performance of stitches of temporary appointment and making of intensifying lines in production of garments.
Coats Aquamelt threads At immersion of the processed site in water of a thread are dissolved and, thus, it is rather easy to remove them from product seams.
Conventional sewing threads used for basting or tacking operations hold in place or join one or more fabric ply's which are then (if visible) unpicked after a garment is complete.
Aquamelt threads the ideal threads suitable for performance of any kinds of temporary stitches and lines since they do not damage fabric and do not pull together a seam during removal of already unnecessary temporary stitches and lines after performance of all necessary operations.
Main types of application
- The strengthening line on cuts of a mouth and proym
- Mortgaging of folds
- Primetyvaniye of a corsage band
- Copy stitches
- Wit of products from the fabrics difficult in tailoring
- Performance of applications manually and by car
- Tailoring of female tops (tucks, reliefs, assemblies, flounces, ruches)
- Tailoring of women's and men's shirts
- Tailoring of skirts, dresses and trousers
- Combination of drawing when tailoring products from fabric in a cage or a strip
Features and advantages
- Threads of Coats Aquamelt possess good technological properties and do not represent any problems during removal of temporary stitches and lines.
- Threads of Coats Aquamelt are completely dissolved in water, without leaving any marks on fabric and seams.
- Threads of Coats Aquamelt reduce amount of works and quantity of a vermena which leaves on removal of the stitches and lines of temporary appointment stitched by usual threads.
- Threads of Coats Aquamelt do not provrezhdat structure of fabric and do not lead to tightening and a rupture of seams during negligent removal of temporary lines and stitches because of what products reject.
- After removal of threads of Coats Aquamelt the seam remains pure without the stretched stitches and smetochny threads which did not manage to be removed.
Global offer (Teks No.) | Label number (Nm) | Addition | Average durability | Average lengthening of %, | The recommended needle size * | ||
---|---|---|---|---|---|---|---|
- | - | - | sn | Grams | - | Singer | Metric numbering |
* Instructions for selection of needles have exclusively advisory nature and depend only on characteristics of the required seam
In view of the fact that the possibility of application of this or that thread more depends on conditions of final application of a finished product, the customer should hold preliminary testing to be convinced that the picked-up thread applicable for this type of a product. The technical information given above is based on average values and can be used only as approximate. |
|||||||
27 | 120 | 2 | 539 | 550 | 19 | 11 - 14 | 75 - 90 |
Physical and Aquamelt chemical properties
Thermal properties |
---|
Completely decomposed are also dissolved in water at the room temperature about 25 °C. |
Shrinkage less than 1% at a temperature of 150 °C. |
Melting temperature when performing operations without water and steam makes 200 °C. |
Speed of a raspvoreniye of PVS of threads depends on water temperature. The recommended water temperature from 40 °C and above. |
Threads of Coats Aquamelt are used for making of the temporary strengthening line on product cuts to prevent fabric deformation (when tailoring products from jersey), to protect cuts from fall to keep a form of figured cuts since the constant machine line will repeat their contours.
For making of a temporary line from the dissolved threads by car of a shuttle stitch it is recommended to fill threads both in a needle, and in a bobbin. It is desirable to install the device of undercutting of threads which will provide the normal thickness of a line.