Currency MDL
Installation of automatic equipment for gate order in Chişinău
Order Installation of automatic equipment for gate
Installation of automatic equipment for gate

Installation of automatic equipment for gate

Reconfirm the price with seller
Seller
Moldova, Chişinău
(View map)
+373 
Display phones
Description

Installation of CAME automatic equipment (on the example of the BX-A drive)

The CAME company makes automatic drives more than 30 years. Are during this time brought to perfection of both a design of automatic drives, and technology of installation on various objects. The technology of installation is very simple and can be generally described by sequence in 7 steps. Let's bring her on the example of installation of the CAME BX-A drive for retractable gate. The BX-A drive - automatic system for retractable gate. The system is developed and made by company Samesoglasno to requirements of the standard of safety (UNI8612). Class of protection IP54.

Step 1. - pay attention! The BX-A drive is calculated on use for automation of gate weighing up to 400 kg. Drive supply voltage - ~ 220B. Working current - 2,6A. Laying of a cable has to be carried out according to the scheme on an instruction cover with observance of rules of electrical safety (PUE and other normative documents).


Step 2. - it is necessary to prepare the concrete basis corresponding to overall dimensions of the drive (the concrete basis has to tower on 50 mm over the earth).

You watch the description of a design of the concrete basis in the section "Technical support".

To curve an anchor on the assembly basis, to insert bolts and to fix by nuts. An assembly plate with anchors and mortgages for electric cables have to be drowned in the concrete basis. Pay attention! The landing plate has to be absolutely horizontal and pure from construction debris. The drive needs to be grounded surely!

Step 3. - install the drive on the assembly basis. Before installation adjusting bolts should be unscrewed on 5 - 10 mm, for adjustment of coupling of a gear wheel with a gear lath, and also vertical adjustment of the drive and its alignment. Alignment of coupling of a gear wheel of the drive with a gear lath is made by means of the adjusting system consisting from:

  • assembly basis, anchor bolts for horizontal adjustment;
  • steel hairpins with a carving for vertical adjustment and alignment.
Step 4. - we level the drive by means of adjusting bolts.

Step 5. - to establish an emphasis for trailer switches in final points of the movement of gate. To fix a mechanical emphasis for trailer switches on a gear lath in necessary places (points of the maximum opening and closing of gate). Pay attention! It is necessary to establish an emphasis (traps) in final provisions of a shutter of gate. The shutter of gate should not concern a mechanical emphasis (traps) in completely open and closed position.

Step 6. - to execute electric connection according to the scheme.
By default by delivery connection of the engine and trailer switches is calculated on installation of the drive at the left (if to take a detached view territories of object). At installation of the drive it is necessary on the right:

  • to change connections of trailer switches to the control unit;
  • to change connections of the engine to the control unit.


Step 7. - we program a charm on the control unit, for control of the drive.

On this pimer it is practically possible to present the volume of the performed works on installation of the automatic drive on retractable gate.

Installation of the drive for retractable gate of BK BKE

PREPARATORY PROCEDURES AND CHECKS - the design of gate has to be rather strong and rigid. Rollers and carts on which gate move have to rotate and have waterproof greasing easily. The rail on which rollers of gate move has to be strong, is rigidly fixed on a surface and should not have the mechanical damages and ledges hindering the movement of a shutter of gate. The top guide should not hinder the movement of gate. ATTENTION! A mechanical emphasis in final provisions of a shutter of gate has to be without fail established. Laying of a cable has to be carried out according to the scheme on an instruction cover according to the existing normative documents. ATTENTION! The drive needs to be grounded surely!

PREPARATION of the SEAT - to curve an anchor on the assembly basis. To insert bolts into the openings intended for them and to put on them the clamps. To prepare the concrete basis corresponding to overall dimensions of the drive (the concrete basis has to tower on 50 mm over the earth). An assembly plate with anchors and mortgages for electric cables have to be drowned in the concrete basis. The assembly basis has to be absolutely horizontal and pure.

INSTALLATION of the GEAR LATH - for the VKE models begin installation of a gear lath with the middle of gate. It will give the chance to the coding device correctly to define the provision of gate. (The maximum width of a shutter is 13 m). Installation of a gear lath is carried out in the following sequence:

- to unblock a reducer;

- to put a gear lath on a gear wheel of the drive and to press it to gate;

- to manually move gate until the lath is not established on all length;

- when all lath is fixed on gate, using adjusting hairpins, to adjust a gap between a gear wheel and a gear lath within 1-2 mm. This gap guarantees that the weight of gate will not influence a reducer;

- after performance of adjustment to fix the drive two nuts. ATTENTION! After installation it is necessary to grease a gear lath with greasing.

INSTALLATION of the MECHANICAL EMPHASIS (TRAPS) And EMPHASIS FOR TRAILER SWITCHES - to fix a mechanical emphasis for trailer switches on a gear lath in necessary places (points of the maximum opening and closing of gate). ATTENTION! It is necessary to establish an emphasis (traps) in final provisions of a shutter of gate. The NOTE - the shutter of gate should not concern a mechanical emphasis (traps) in completely open and closed position.

The REDUCER UNBLOCKING - for a drive reducer unblocking (for manual opening of gate in case of an emergency, for example, at shutdown of power supply) to open a key a door from the back, to insert the handle of an unblocking of the drive and to rotate it counterclockwise. For blocking of the drive to rotate the handle in the opposite direction. The NOTE - when blocking the drive it is necessary to shake slightly a shutter of gate for normal coupling by a gear wheel in a reducer.

Contact the seller
Installation of automatic equipment for gate
Installation of automatic equipment for gate
Compare0
ClearSelected items: 0